diff --git a/doc/uImage.FIT/kernel.its b/doc/uImage.FIT/kernel.its
deleted file mode 100644
index 77ddf62..0000000
--- a/doc/uImage.FIT/kernel.its
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Simple U-Boot uImage source file containing a single kernel
- */
-
-/dts-v1/;
-
-/ {
-	description = "Simple image with single Linux kernel";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			description = "Vanilla Linux kernel";
-			data = /incbin/("./vmlinux.bin.gz");
-			type = "kernel";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "crc32";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-	};
-
-	configurations {
-		default = "config-1";
-		config-1 {
-			description = "Boot Linux kernel";
-			kernel = "kernel";
-		};
-	};
-};
-
-
-
-For x86 a setup node is also required: see x86-fit-boot.txt.
-
-/dts-v1/;
-
-/ {
-	description = "Simple image with single Linux kernel on x86";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			description = "Vanilla Linux kernel";
-			data = /incbin/("./image.bin.lzo");
-			type = "kernel";
-			arch = "x86";
-			os = "linux";
-			compression = "lzo";
-			load = <0x01000000>;
-			entry = <0x00000000>;
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-
-		setup {
-			description = "Linux setup.bin";
-			data = /incbin/("./setup.bin");
-			type = "x86_setup";
-			arch = "x86";
-			os = "linux";
-			compression = "none";
-			load = <0x00090000>;
-			entry = <0x00090000>;
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-	};
-
-	configurations {
-		default = "config-1";
-		config-1 {
-			description = "Boot Linux kernel";
-			kernel = "kernel";
-			setup = "setup";
-		};
-	};
-};
-
-Note: the above assumes a 32-bit kernel. To directly boot a 64-bit kernel,
-change both arch values to "x86_64". U-Boot will then change to 64-bit mode
-before booting the kernel (see boot_linux_kernel()).
diff --git a/doc/uImage.FIT/kernel_fdt.its b/doc/uImage.FIT/kernel_fdt.its
deleted file mode 100644
index 000d85b..0000000
--- a/doc/uImage.FIT/kernel_fdt.its
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Simple U-Boot uImage source file containing a single kernel and FDT blob
- */
-
-/dts-v1/;
-
-/ {
-	description = "Simple image with single Linux kernel and FDT blob";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			description = "Vanilla Linux kernel";
-			data = /incbin/("./vmlinux.bin.gz");
-			type = "kernel";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "crc32";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-		fdt-1 {
-			description = "Flattened Device Tree blob";
-			data = /incbin/("./target.dtb");
-			type = "flat_dt";
-			arch = "ppc";
-			compression = "none";
-			hash-1 {
-				algo = "crc32";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-	};
-
-	configurations {
-		default = "conf-1";
-		conf-1 {
-			description = "Boot Linux kernel with FDT blob";
-			kernel = "kernel";
-			fdt = "fdt-1";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/kernel_fdts_compressed.its b/doc/uImage.FIT/kernel_fdts_compressed.its
deleted file mode 100644
index 8f81106..0000000
--- a/doc/uImage.FIT/kernel_fdts_compressed.its
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * U-Boot uImage source file with a kernel and multiple compressed FDT blobs.
- * Since the FDTs are compressed, configurations must provide a compatible
- * string to match directly.
- */
-
-/dts-v1/;
-
-/ {
-	description = "Image with single Linux kernel and compressed FDT blobs";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			description = "Vanilla Linux kernel";
-			data = /incbin/("./vmlinux.bin.gz");
-			type = "kernel";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "crc32";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-		fdt@1 {
-			description = "Flattened Device Tree blob 1";
-			data = /incbin/("./myboard-var1.dtb");
-			type = "flat_dt";
-			arch = "ppc";
-			compression = "gzip";
-			hash-1 {
-				algo = "crc32";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-		fdt@2 {
-			description = "Flattened Device Tree blob 2";
-			data = /incbin/("./myboard-var2.dtb");
-			type = "flat_dt";
-			arch = "ppc";
-			compression = "lzma";
-			hash-1 {
-				algo = "crc32";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-	};
-
-	configurations {
-		default = "conf@1";
-		conf@1 {
-			description = "Boot Linux kernel with FDT blob 1";
-			kernel = "kernel";
-			fdt = "fdt@1";
-			compatible = "myvendor,myboard-variant1";
-		};
-		conf@2 {
-			description = "Boot Linux kernel with FDT blob 2";
-			kernel = "kernel";
-			fdt = "fdt@2";
-			compatible = "myvendor,myboard-variant2";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/multi-with-fpga.its b/doc/uImage.FIT/multi-with-fpga.its
deleted file mode 100644
index 021cbc7..0000000
--- a/doc/uImage.FIT/multi-with-fpga.its
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs
- * This example makes use of the 'loadables' field
- */
-
-/dts-v1/;
-
-/ {
-	description = "Configuration to load fpga before Kernel";
-	#address-cells = <1>;
-
-	images {
-		fdt-1 {
-			description = "zc706";
-			data = /incbin/("/tftpboot/devicetree.dtb");
-			type = "flat_dt";
-			arch = "arm";
-			compression = "none";
-			load = <0x10000000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-
-		fpga {
-			description = "FPGA";
-			data = /incbin/("/tftpboot/download.bit");
-			type = "fpga";
-			arch = "arm";
-			compression = "none";
-			load = <0x30000000>;
-			compatible = "u-boot,fpga-legacy"
-			hash-1 {
-				algo = "md5";
-			};
-		};
-
-		linux_kernel {
-			description = "Linux";
-			data = /incbin/("/tftpboot/zImage");
-			type = "kernel";
-			arch = "arm";
-			os = "linux";
-			compression = "none";
-			load = <0x8000>;
-			entry = <0x8000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-	};
-
-	configurations {
-		default = "config-2";
-		config-1 {
-			description = "Linux";
-			kernel = "linux_kernel";
-			fdt = "fdt-1";
-		};
-
-		config-2 {
-			description = "Linux with fpga";
-			kernel = "linux_kernel";
-			fdt = "fdt-1";
-			loadables = "fpga";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/multi-with-loadables.its b/doc/uImage.FIT/multi-with-loadables.its
deleted file mode 100644
index 4d4909f..0000000
--- a/doc/uImage.FIT/multi-with-loadables.its
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs
- * This example makes use of the 'loadables' field
- */
-
-/dts-v1/;
-
-/ {
-	description = "Configuration to load a Xen Kernel";
-	#address-cells = <1>;
-
-	images {
-		xen_kernel {
-			description = "xen binary";
-			data = /incbin/("./xen");
-			type = "kernel";
-			arch = "arm";
-			os = "linux";
-			compression = "none";
-			load = <0xa0000000>;
-			entry = <0xa0000000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-
-		fdt-1 {
-			description = "xexpress-ca15 tree blob";
-			data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
-			type = "flat_dt";
-			arch = "arm";
-			compression = "none";
-			load = <0xb0000000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-
-		fdt-2 {
-			description = "xexpress-ca15 tree blob";
-			data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
-			type = "flat_dt";
-			arch = "arm";
-			compression = "none";
-			load = <0xb0400000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-
-		linux_kernel {
-			description = "Linux Image";
-			data = /incbin/("./Image");
-			type = "kernel";
-			arch = "arm";
-			os = "linux";
-			compression = "none";
-			load = <0xa0000000>;
-			entry = <0xa0000000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-	};
-
-	configurations {
-		default = "config-2";
-
-		config-1 {
-			description = "Just plain Linux";
-			kernel = "linux_kernel";
-			fdt = "fdt-1";
-		};
-
-		config-2 {
-			description = "Xen one loadable";
-			kernel = "xen_kernel";
-			fdt = "fdt-1";
-			loadables = "linux_kernel";
-		};
-
-		config-3 {
-			description = "Xen two loadables";
-			kernel = "xen_kernel";
-			fdt = "fdt-1";
-			loadables = "linux_kernel", "fdt-2";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/multi.its b/doc/uImage.FIT/multi.its
deleted file mode 100644
index 26c8dad..0000000
--- a/doc/uImage.FIT/multi.its
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * U-Boot uImage source file with multiple kernels, ramdisks and FDT blobs
- */
-
-/dts-v1/;
-
-/ {
-	description = "Various kernels, ramdisks and FDT blobs";
-	#address-cells = <1>;
-
-	images {
-		kernel-1 {
-			description = "vanilla-2.6.23";
-			data = /incbin/("./vmlinux.bin.gz");
-			type = "kernel";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "md5";
-			};
-			hash-2 {
-				algo = "sha1";
-			};
-		};
-
-		kernel-2 {
-			description = "2.6.23-denx";
-			data = /incbin/("./2.6.23-denx.bin.gz");
-			type = "kernel";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-
-		kernel-3 {
-			description = "2.4.25-denx";
-			data = /incbin/("./2.4.25-denx.bin.gz");
-			type = "kernel";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "md5";
-			};
-		};
-
-		ramdisk-1 {
-			description = "eldk-4.2-ramdisk";
-			data = /incbin/("./eldk-4.2-ramdisk");
-			type = "ramdisk";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-
-		ramdisk-2 {
-			description = "eldk-3.1-ramdisk";
-			data = /incbin/("./eldk-3.1-ramdisk");
-			type = "ramdisk";
-			arch = "ppc";
-			os = "linux";
-			compression = "gzip";
-			load = <00000000>;
-			entry = <00000000>;
-			hash-1 {
-				algo = "crc32";
-			};
-		};
-
-		fdt-1 {
-			description = "tqm5200-fdt";
-			data = /incbin/("./tqm5200.dtb");
-			type = "flat_dt";
-			arch = "ppc";
-			compression = "none";
-			hash-1 {
-				algo = "crc32";
-			};
-		};
-
-		fdt-2 {
-			description = "tqm5200s-fdt";
-			data = /incbin/("./tqm5200s.dtb");
-			type = "flat_dt";
-			arch = "ppc";
-			compression = "none";
-			load = <00700000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-
-	};
-
-	configurations {
-		default = "config-1";
-
-		config-1 {
-			description = "tqm5200 vanilla-2.6.23 configuration";
-			kernel = "kernel-1";
-			ramdisk = "ramdisk-1";
-			fdt = "fdt-1";
-		};
-
-		config-2 {
-			description = "tqm5200s denx-2.6.23 configuration";
-			kernel = "kernel-2";
-			ramdisk = "ramdisk-1";
-			fdt = "fdt-2";
-		};
-
-		config-3 {
-			description = "tqm5200s denx-2.4.25 configuration";
-			kernel = "kernel-3";
-			ramdisk = "ramdisk-2";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/multi_spl.its b/doc/uImage.FIT/multi_spl.its
deleted file mode 100644
index 5942199..0000000
--- a/doc/uImage.FIT/multi_spl.its
+++ /dev/null
@@ -1,96 +0,0 @@
-/dts-v1/;
-
-/*
- * (Bogus) example FIT image description file demonstrating the usage
- * of multiple images loaded by the SPL.
- * Several binaries will be loaded at their respective load addresses.
- *
- * For booting U-Boot, "firmware" is searched first. If not found, "loadables"
- * is used to identify images to be loaded into memory. If falcon boot is
- * enabled, "kernel" is searched first. If not found, it falls back to the
- * same flow as booting U-Boot. Changing image type will result skipping
- * specific image.
- *
- * Finally the one image specifying an entry point will be entered by the SPL.
- */
-
-/ {
-	description = "multiple firmware blobs and U-Boot, loaded by SPL";
-	#address-cells = <0x1>;
-
-	images {
-
-		uboot {
-			description = "U-Boot (64-bit)";
-			type = "standalone";
-			arch = "arm64";
-			compression = "none";
-			load = <0x4a000000>;
-		};
-
-		atf {
-			description = "ARM Trusted Firmware";
-			type = "firmware";
-			arch = "arm64";
-			compression = "none";
-			load = <0x18000>;
-			entry = <0x18000>;
-		};
-
-		mgmt-firmware {
-			description = "arisc management processor firmware";
-			type = "firmware";
-			arch = "or1k";
-			compression = "none";
-			load = <0x40000>;
-		};
-
-		fdt-1 {
-			description = "Pine64+ DT";
-			type = "flat_dt";
-			compression = "none";
-			load = <0x4fa00000>;
-			arch = "arm64";
-		};
-
-		fdt-2 {
-			description = "Pine64 DT";
-			type = "flat_dt";
-			compression = "none";
-			load = <0x4fa00000>;
-			arch = "arm64";
-		};
-
-		kernel {
-			description = "4.7-rc5 kernel";
-			type = "kernel";
-			compression = "none";
-			load = <0x40080000>;
-			arch = "arm64";
-		};
-
-		initrd {
-			description = "Debian installer initrd";
-			type = "ramdisk";
-			compression = "none";
-			load = <0x4fe00000>;
-			arch = "arm64";
-		};
-	};
-
-	configurations {
-		default = "config-1";
-
-		config-1 {
-			description = "sun50i-a64-pine64-plus";
-			loadables = "uboot", "atf", "kernel", "initrd";
-			fdt = "fdt-1";
-		};
-
-		config-2 {
-			description = "sun50i-a64-pine64";
-			loadables = "uboot", "atf", "mgmt-firmware";
-			fdt = "fdt-2";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/sec_firmware_ppa.its b/doc/uImage.FIT/sec_firmware_ppa.its
deleted file mode 100644
index a7acde1..0000000
--- a/doc/uImage.FIT/sec_firmware_ppa.its
+++ /dev/null
@@ -1,49 +0,0 @@
-/dts-v1/;
-
-/*
- * Example FIT image description file demonstrating the usage
- * of SEC Firmware and multiple loadable images loaded by the u-boot.
- * For booting PPA (SEC Firmware), "firmware" is searched and loaded.
- *
- * Multiple binaries will be loaded as "loadables" (if present) at their
- * respective load offsets from firmware image address.
- */
-
-/{
-	description = "PPA Firmware";
-	#address-cells = <1>;
-	images {
-		firmware@1 {
-			description = "PPA Firmware: <version>";
-			data = /incbin/("../obj/monitor.bin");
-			type = "firmware";
-			arch = "arm64";
-			compression = "none";
-		};
-		trustedOS@1 {
-			description = "Trusted OS";
-			data = /incbin/("../../tee.bin");
-			type = "OS";
-			arch = "arm64";
-			compression = "none";
-			load = <0x00200000>;
-		};
-		fuse_scr {
-			description = "Fuse Script";
-			data = /incbin/("../../fuse_scr.bin");
-			type = "firmware";
-			arch = "arm64";
-			compression = "none";
-			load = <0x00180000>;
-		};
-	};
-
-	configurations {
-		default = "config-1";
-		config-1 {
-			description = "PPA Secure firmware";
-			firmware = "firmware@1";
-			loadables = "trustedOS@1", "fuse_scr";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/sign-configs.its b/doc/uImage.FIT/sign-configs.its
deleted file mode 100644
index 9e992c1..0000000
--- a/doc/uImage.FIT/sign-configs.its
+++ /dev/null
@@ -1,45 +0,0 @@
-/dts-v1/;
-
-/ {
-	description = "Chrome OS kernel image with one or more FDT blobs";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			data = /incbin/("test-kernel.bin");
-			type = "kernel_noload";
-			arch = "sandbox";
-			os = "linux";
-			compression = "lzo";
-			load = <0x4>;
-			entry = <0x8>;
-			kernel-version = <1>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-		fdt-1 {
-			description = "snow";
-			data = /incbin/("sandbox-kernel.dtb");
-			type = "flat_dt";
-			arch = "sandbox";
-			compression = "none";
-			fdt-version = <1>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-	};
-	configurations {
-		default = "conf-1";
-		conf-1 {
-			kernel = "kernel";
-			fdt = "fdt-1";
-			signature {
-				algo = "sha1,rsa2048";
-				key-name-hint = "dev";
-				sign-images = "fdt", "kernel";
-			};
-		};
-	};
-};
diff --git a/doc/uImage.FIT/sign-images.its b/doc/uImage.FIT/sign-images.its
deleted file mode 100644
index 18c759e..0000000
--- a/doc/uImage.FIT/sign-images.its
+++ /dev/null
@@ -1,42 +0,0 @@
-/dts-v1/;
-
-/ {
-	description = "Chrome OS kernel image with one or more FDT blobs";
-	#address-cells = <1>;
-
-	images {
-		kernel {
-			data = /incbin/("test-kernel.bin");
-			type = "kernel_noload";
-			arch = "sandbox";
-			os = "linux";
-			compression = "none";
-			load = <0x4>;
-			entry = <0x8>;
-			kernel-version = <1>;
-			signature {
-				algo = "sha1,rsa2048";
-				key-name-hint = "dev";
-			};
-		};
-		fdt-1 {
-			description = "snow";
-			data = /incbin/("sandbox-kernel.dtb");
-			type = "flat_dt";
-			arch = "sandbox";
-			compression = "none";
-			fdt-version = <1>;
-			signature {
-				algo = "sha1,rsa2048";
-				key-name-hint = "dev";
-			};
-		};
-	};
-	configurations {
-		default = "conf-1";
-		conf-1 {
-			kernel = "kernel";
-			fdt = "fdt-1";
-		};
-	};
-};
diff --git a/doc/uImage.FIT/uefi.its b/doc/uImage.FIT/uefi.its
deleted file mode 100644
index 378ca4e..0000000
--- a/doc/uImage.FIT/uefi.its
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Example FIT image description file demonstrating the usage of the
- * bootm command to launch UEFI binaries.
- *
- * Two boot configurations are available to enable booting GRUB2 on QEMU,
- * the former uses a FDT blob contained in the FIT image, while the later
- * relies on the FDT provided by the board emulator.
- */
-
-/dts-v1/;
-
-/ {
-	description = "GRUB2 EFI and QEMU FDT blob";
-	#address-cells = <1>;
-
-	images {
-		efi-grub {
-			description = "GRUB EFI Firmware";
-			data = /incbin/("bootarm.efi");
-			type = "kernel_noload";
-			arch = "arm";
-			os = "efi";
-			compression = "none";
-			load = <0x0>;
-			entry = <0x0>;
-			hash-1 {
-				algo = "sha256";
-			};
-		};
-
-		fdt-qemu {
-			description = "QEMU DTB";
-			data = /incbin/("qemu-arm.dtb");
-			type = "flat_dt";
-			arch = "arm";
-			compression = "none";
-			hash-1 {
-				algo = "sha256";
-			};
-		};
-	};
-
-	configurations {
-		default = "config-grub-fdt";
-
-		config-grub-fdt {
-			description = "GRUB EFI Boot w/ FDT";
-			kernel = "efi-grub";
-			fdt = "fdt-qemu";
-			signature-1 {
-				algo = "sha256,rsa2048";
-				key-name-hint = "dev";
-				sign-images = "kernel", "fdt";
-			};
-		};
-
-		config-grub-nofdt {
-			description = "GRUB EFI Boot w/o FDT";
-			kernel = "efi-grub";
-			signature-1 {
-				algo = "sha256,rsa2048";
-				key-name-hint = "dev";
-				sign-images = "kernel";
-			};
-		};
-	};
-};
diff --git a/doc/uImage.FIT/update3.its b/doc/uImage.FIT/update3.its
deleted file mode 100644
index 0659f20..0000000
--- a/doc/uImage.FIT/update3.its
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Example Automatic software update file.
- */
-
-/dts-v1/;
-
-/ {
-	description = "Automatic software updates: kernel, ramdisk, FDT";
-	#address-cells = <1>;
-
-	images {
-		update-1 {
-			description = "Linux kernel binary";
-			data = /incbin/("./vmlinux.bin.gz");
-			compression = "none";
-			type = "firmware";
-			load = <FF700000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-		update-2 {
-			description = "Ramdisk image";
-			data = /incbin/("./ramdisk_image.gz");
-			compression = "none";
-			type = "firmware";
-			load = <FF8E0000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-
-		update-3 {
-			description = "FDT blob";
-			data = /incbin/("./blob.fdt");
-			compression = "none";
-			type = "firmware";
-			load = <FFAC0000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-	};
-};
diff --git a/doc/uImage.FIT/update_uboot.its b/doc/uImage.FIT/update_uboot.its
deleted file mode 100644
index aec4826..0000000
--- a/doc/uImage.FIT/update_uboot.its
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Automatic software update for U-Boot
- * Make sure the flashing addresses ('load' prop) is correct for your board!
- */
-
-/dts-v1/;
-
-/ {
-	description = "Automatic U-Boot update";
-	#address-cells = <1>;
-
-	images {
-		update-1 {
-			description = "U-Boot binary";
-			data = /incbin/("./u-boot.bin");
-			compression = "none";
-			type = "firmware";
-			load = <0xFFFC0000>;
-			hash-1 {
-				algo = "sha1";
-			};
-		};
-	};
-};
diff --git a/doc/usage/fit/kernel.rst b/doc/usage/fit/kernel.rst
new file mode 100644
index 0000000..012a81e
--- /dev/null
+++ b/doc/usage/fit/kernel.rst
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Single kernel
+=============
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Simple image with single Linux kernel";
+        #address-cells = <1>;
+
+        images {
+            kernel {
+                description = "Vanilla Linux kernel";
+                data = /incbin/("./vmlinux.bin.gz");
+                type = "kernel";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "crc32";
+                };
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+        };
+
+        configurations {
+            default = "config-1";
+            config-1 {
+                description = "Boot Linux kernel";
+                kernel = "kernel";
+            };
+        };
+    };
+
+
+For x86 a setup node is also required: see x86-fit-boot::
+
+    /dts-v1/;
+
+    / {
+        description = "Simple image with single Linux kernel on x86";
+        #address-cells = <1>;
+
+        images {
+            kernel {
+                description = "Vanilla Linux kernel";
+                data = /incbin/("./image.bin.lzo");
+                type = "kernel";
+                arch = "x86";
+                os = "linux";
+                compression = "lzo";
+                load = <0x01000000>;
+                entry = <0x00000000>;
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+
+            setup {
+                description = "Linux setup.bin";
+                data = /incbin/("./setup.bin");
+                type = "x86_setup";
+                arch = "x86";
+                os = "linux";
+                compression = "none";
+                load = <0x00090000>;
+                entry = <0x00090000>;
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+        };
+
+        configurations {
+            default = "config-1";
+            config-1 {
+                description = "Boot Linux kernel";
+                kernel = "kernel";
+                setup = "setup";
+            };
+        };
+    };
+
+Note: the above assumes a 32-bit kernel. To directly boot a 64-bit kernel,
+change both arch values to "x86_64". U-Boot will then change to 64-bit mode
+before booting the kernel (see boot_linux_kernel()).
diff --git a/doc/usage/fit/kernel_fdt.rst b/doc/usage/fit/kernel_fdt.rst
new file mode 100644
index 0000000..8eee13a
--- /dev/null
+++ b/doc/usage/fit/kernel_fdt.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Single kernel and FDT blob
+==========================
+
+::
+
+	/dts-v1/;
+
+	/ {
+	description = "Simple image with single Linux kernel and FDT blob";
+	#address-cells = <1>;
+
+	images {
+		kernel {
+		description = "Vanilla Linux kernel";
+		data = /incbin/("./vmlinux.bin.gz");
+		type = "kernel";
+		arch = "ppc";
+		os = "linux";
+		compression = "gzip";
+		load = <00000000>;
+		entry = <00000000>;
+		hash-1 {
+			algo = "crc32";
+		};
+		hash-2 {
+			algo = "sha1";
+		};
+		};
+		fdt-1 {
+		description = "Flattened Device Tree blob";
+		data = /incbin/("./target.dtb");
+		type = "flat_dt";
+		arch = "ppc";
+		compression = "none";
+		hash-1 {
+			algo = "crc32";
+		};
+		hash-2 {
+			algo = "sha1";
+		};
+		};
+	};
+
+	configurations {
+		default = "conf-1";
+		conf-1 {
+		description = "Boot Linux kernel with FDT blob";
+		kernel = "kernel";
+		fdt = "fdt-1";
+		};
+	};
+	};
diff --git a/doc/usage/fit/kernel_fdts_compressed.rst b/doc/usage/fit/kernel_fdts_compressed.rst
new file mode 100644
index 0000000..0b169c7
--- /dev/null
+++ b/doc/usage/fit/kernel_fdts_compressed.rst
@@ -0,0 +1,77 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Kernel and multiple compressed FDT blobs
+========================================
+
+Since the FDTs are compressed, configurations must provide a compatible
+string to match directly.
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Image with single Linux kernel and compressed FDT blobs";
+        #address-cells = <1>;
+
+        images {
+            kernel {
+                description = "Vanilla Linux kernel";
+                data = /incbin/("./vmlinux.bin.gz");
+                type = "kernel";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "crc32";
+                };
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+            fdt@1 {
+                description = "Flattened Device Tree blob 1";
+                data = /incbin/("./myboard-var1.dtb");
+                type = "flat_dt";
+                arch = "ppc";
+                compression = "gzip";
+                hash-1 {
+                    algo = "crc32";
+                };
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+            fdt@2 {
+                description = "Flattened Device Tree blob 2";
+                data = /incbin/("./myboard-var2.dtb");
+                type = "flat_dt";
+                arch = "ppc";
+                compression = "lzma";
+                hash-1 {
+                    algo = "crc32";
+                };
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+        };
+
+        configurations {
+            default = "conf@1";
+            conf@1 {
+                description = "Boot Linux kernel with FDT blob 1";
+                kernel = "kernel";
+                fdt = "fdt@1";
+                compatible = "myvendor,myboard-variant1";
+            };
+            conf@2 {
+                description = "Boot Linux kernel with FDT blob 2";
+                kernel = "kernel";
+                fdt = "fdt@2";
+                compatible = "myvendor,myboard-variant2";
+            };
+        };
+    };
diff --git a/doc/usage/fit/multi-with-fpga.rst b/doc/usage/fit/multi-with-fpga.rst
new file mode 100644
index 0000000..28d7d5d
--- /dev/null
+++ b/doc/usage/fit/multi-with-fpga.rst
@@ -0,0 +1,70 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Multiple kernels, ramdisks and FDT blobs with FPGA
+==================================================
+
+This example makes use of the 'loadables' field::
+
+    /dts-v1/;
+
+    / {
+        description = "Configuration to load fpga before Kernel";
+        #address-cells = <1>;
+
+        images {
+            fdt-1 {
+                description = "zc706";
+                data = /incbin/("/tftpboot/devicetree.dtb");
+                type = "flat_dt";
+                arch = "arm";
+                compression = "none";
+                load = <0x10000000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+
+            fpga {
+                description = "FPGA";
+                data = /incbin/("/tftpboot/download.bit");
+                type = "fpga";
+                arch = "arm";
+                compression = "none";
+                load = <0x30000000>;
+                compatible = "u-boot,fpga-legacy"
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+
+            linux_kernel {
+                description = "Linux";
+                data = /incbin/("/tftpboot/zImage");
+                type = "kernel";
+                arch = "arm";
+                os = "linux";
+                compression = "none";
+                load = <0x8000>;
+                entry = <0x8000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+        };
+
+        configurations {
+            default = "config-2";
+            config-1 {
+                description = "Linux";
+                kernel = "linux_kernel";
+                fdt = "fdt-1";
+            };
+
+            config-2 {
+                description = "Linux with fpga";
+                kernel = "linux_kernel";
+                fdt = "fdt-1";
+                loadables = "fpga";
+            };
+        };
+    };
diff --git a/doc/usage/fit/multi-with-loadables.rst b/doc/usage/fit/multi-with-loadables.rst
new file mode 100644
index 0000000..a0241df
--- /dev/null
+++ b/doc/usage/fit/multi-with-loadables.rst
@@ -0,0 +1,91 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Multiple kernels, ramdisks and FDT blobs with Xen
+=================================================
+
+This example makes use of the 'loadables' field::
+
+    /dts-v1/;
+
+    / {
+        description = "Configuration to load a Xen Kernel";
+        #address-cells = <1>;
+
+        images {
+            xen_kernel {
+                description = "xen binary";
+                data = /incbin/("./xen");
+                type = "kernel";
+                arch = "arm";
+                os = "linux";
+                compression = "none";
+                load = <0xa0000000>;
+                entry = <0xa0000000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+
+            fdt-1 {
+                description = "xexpress-ca15 tree blob";
+                data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
+                type = "flat_dt";
+                arch = "arm";
+                compression = "none";
+                load = <0xb0000000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+
+            fdt-2 {
+                description = "xexpress-ca15 tree blob";
+                data = /incbin/("./vexpress-v2p-ca15-tc1.dtb");
+                type = "flat_dt";
+                arch = "arm";
+                compression = "none";
+                load = <0xb0400000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+
+            linux_kernel {
+                description = "Linux Image";
+                data = /incbin/("./Image");
+                type = "kernel";
+                arch = "arm";
+                os = "linux";
+                compression = "none";
+                load = <0xa0000000>;
+                entry = <0xa0000000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+        };
+
+        configurations {
+            default = "config-2";
+
+            config-1 {
+                description = "Just plain Linux";
+                kernel = "linux_kernel";
+                fdt = "fdt-1";
+            };
+
+            config-2 {
+                description = "Xen one loadable";
+                kernel = "xen_kernel";
+                fdt = "fdt-1";
+                loadables = "linux_kernel";
+            };
+
+            config-3 {
+                description = "Xen two loadables";
+                kernel = "xen_kernel";
+                fdt = "fdt-1";
+                loadables = "linux_kernel", "fdt-2";
+            };
+        };
+    };
diff --git a/doc/usage/fit/multi.rst b/doc/usage/fit/multi.rst
new file mode 100644
index 0000000..2e6ae58
--- /dev/null
+++ b/doc/usage/fit/multi.rst
@@ -0,0 +1,136 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Multiple kernels, ramdisks and FDT blobs
+========================================
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Various kernels, ramdisks and FDT blobs";
+        #address-cells = <1>;
+
+        images {
+            kernel-1 {
+                description = "vanilla-2.6.23";
+                data = /incbin/("./vmlinux.bin.gz");
+                type = "kernel";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "md5";
+                };
+                hash-2 {
+                    algo = "sha1";
+                };
+            };
+
+            kernel-2 {
+                description = "2.6.23-denx";
+                data = /incbin/("./2.6.23-denx.bin.gz");
+                type = "kernel";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+
+            kernel-3 {
+                description = "2.4.25-denx";
+                data = /incbin/("./2.4.25-denx.bin.gz");
+                type = "kernel";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "md5";
+                };
+            };
+
+            ramdisk-1 {
+                description = "eldk-4.2-ramdisk";
+                data = /incbin/("./eldk-4.2-ramdisk");
+                type = "ramdisk";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+
+            ramdisk-2 {
+                description = "eldk-3.1-ramdisk";
+                data = /incbin/("./eldk-3.1-ramdisk");
+                type = "ramdisk";
+                arch = "ppc";
+                os = "linux";
+                compression = "gzip";
+                load = <00000000>;
+                entry = <00000000>;
+                hash-1 {
+                    algo = "crc32";
+                };
+            };
+
+            fdt-1 {
+                description = "tqm5200-fdt";
+                data = /incbin/("./tqm5200.dtb");
+                type = "flat_dt";
+                arch = "ppc";
+                compression = "none";
+                hash-1 {
+                    algo = "crc32";
+                };
+            };
+
+            fdt-2 {
+                description = "tqm5200s-fdt";
+                data = /incbin/("./tqm5200s.dtb");
+                type = "flat_dt";
+                arch = "ppc";
+                compression = "none";
+                load = <00700000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+
+        };
+
+        configurations {
+            default = "config-1";
+
+            config-1 {
+                description = "tqm5200 vanilla-2.6.23 configuration";
+                kernel = "kernel-1";
+                ramdisk = "ramdisk-1";
+                fdt = "fdt-1";
+            };
+
+            config-2 {
+                description = "tqm5200s denx-2.6.23 configuration";
+                kernel = "kernel-2";
+                ramdisk = "ramdisk-1";
+                fdt = "fdt-2";
+            };
+
+            config-3 {
+                description = "tqm5200s denx-2.4.25 configuration";
+                kernel = "kernel-3";
+                ramdisk = "ramdisk-2";
+            };
+        };
+    };
diff --git a/doc/usage/fit/multi_spl.rst b/doc/usage/fit/multi_spl.rst
new file mode 100644
index 0000000..74b6f86
--- /dev/null
+++ b/doc/usage/fit/multi_spl.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Multiple images for SPL
+=======================
+
+(Bogus) example FIT image description file demonstrating the usage
+of multiple images loaded by the SPL.
+Several binaries will be loaded at their respective load addresses.
+
+For booting U-Boot, "firmware" is searched first. If not found, "loadables"
+is used to identify images to be loaded into memory. If falcon boot is
+enabled, "kernel" is searched first. If not found, it falls back to the
+same flow as booting U-Boot. Changing image type will result skipping
+specific image.
+
+Finally the one image specifying an entry point will be entered by the SPL.
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "multiple firmware blobs and U-Boot, loaded by SPL";
+        #address-cells = <0x1>;
+
+        images {
+
+            uboot {
+                description = "U-Boot (64-bit)";
+                type = "standalone";
+                arch = "arm64";
+                compression = "none";
+                load = <0x4a000000>;
+            };
+
+            atf {
+                description = "ARM Trusted Firmware";
+                type = "firmware";
+                arch = "arm64";
+                compression = "none";
+                load = <0x18000>;
+                entry = <0x18000>;
+            };
+
+            mgmt-firmware {
+                description = "arisc management processor firmware";
+                type = "firmware";
+                arch = "or1k";
+                compression = "none";
+                load = <0x40000>;
+            };
+
+            fdt-1 {
+                description = "Pine64+ DT";
+                type = "flat_dt";
+                compression = "none";
+                load = <0x4fa00000>;
+                arch = "arm64";
+            };
+
+            fdt-2 {
+                description = "Pine64 DT";
+                type = "flat_dt";
+                compression = "none";
+                load = <0x4fa00000>;
+                arch = "arm64";
+            };
+
+            kernel {
+                description = "4.7-rc5 kernel";
+                type = "kernel";
+                compression = "none";
+                load = <0x40080000>;
+                arch = "arm64";
+            };
+
+            initrd {
+                description = "Debian installer initrd";
+                type = "ramdisk";
+                compression = "none";
+                load = <0x4fe00000>;
+                arch = "arm64";
+            };
+        };
+
+        configurations {
+            default = "config-1";
+
+            config-1 {
+                description = "sun50i-a64-pine64-plus";
+                loadables = "uboot", "atf", "kernel", "initrd";
+                fdt = "fdt-1";
+            };
+
+            config-2 {
+                description = "sun50i-a64-pine64";
+                loadables = "uboot", "atf", "mgmt-firmware";
+                fdt = "fdt-2";
+            };
+        };
+    };
diff --git a/doc/usage/fit/sec_firmware_ppa.rst b/doc/usage/fit/sec_firmware_ppa.rst
new file mode 100644
index 0000000..4cb292c
--- /dev/null
+++ b/doc/usage/fit/sec_firmware_ppa.rst
@@ -0,0 +1,54 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+SEC Firmware and multiple loadable images
+=========================================
+
+Example FIT image description file demonstrating the usage
+of SEC Firmware and multiple loadable images loaded by U-Boot.
+For booting PPA (SEC Firmware), "firmware" is searched and loaded.
+
+Multiple binaries will be loaded as "loadables" (if present) at their
+respective load offsets from firmware image address.
+
+::
+
+    /dts-v1/;
+
+    /{
+        description = "PPA Firmware";
+        #address-cells = <1>;
+        images {
+            firmware@1 {
+                description = "PPA Firmware: <version>";
+                data = /incbin/("../obj/monitor.bin");
+                type = "firmware";
+                arch = "arm64";
+                compression = "none";
+            };
+            trustedOS@1 {
+                description = "Trusted OS";
+                data = /incbin/("../../tee.bin");
+                type = "OS";
+                arch = "arm64";
+                compression = "none";
+                load = <0x00200000>;
+            };
+            fuse_scr {
+                description = "Fuse Script";
+                data = /incbin/("../../fuse_scr.bin");
+                type = "firmware";
+                arch = "arm64";
+                compression = "none";
+                load = <0x00180000>;
+            };
+        };
+
+        configurations {
+            default = "config-1";
+            config-1 {
+                description = "PPA Secure firmware";
+                firmware = "firmware@1";
+                loadables = "trustedOS@1", "fuse_scr";
+            };
+        };
+    };
diff --git a/doc/usage/fit/sign-configs.rst b/doc/usage/fit/sign-configs.rst
new file mode 100644
index 0000000..6a3df8f
--- /dev/null
+++ b/doc/usage/fit/sign-configs.rst
@@ -0,0 +1,52 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Signed configurations
+=====================
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Chrome OS kernel image with one or more FDT blobs";
+        #address-cells = <1>;
+
+        images {
+            kernel {
+                data = /incbin/("test-kernel.bin");
+                type = "kernel_noload";
+                arch = "sandbox";
+                os = "linux";
+                compression = "lzo";
+                load = <0x4>;
+                entry = <0x8>;
+                kernel-version = <1>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+            fdt-1 {
+                description = "snow";
+                data = /incbin/("sandbox-kernel.dtb");
+                type = "flat_dt";
+                arch = "sandbox";
+                compression = "none";
+                fdt-version = <1>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+        };
+        configurations {
+            default = "conf-1";
+            conf-1 {
+                kernel = "kernel";
+                fdt = "fdt-1";
+                signature {
+                    algo = "sha1,rsa2048";
+                    key-name-hint = "dev";
+                    sign-images = "fdt", "kernel";
+                };
+            };
+        };
+    };
diff --git a/doc/usage/fit/sign-images.rst b/doc/usage/fit/sign-images.rst
new file mode 100644
index 0000000..7d54d70
--- /dev/null
+++ b/doc/usage/fit/sign-images.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Signed Images
+=============
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Chrome OS kernel image with one or more FDT blobs";
+        #address-cells = <1>;
+
+        images {
+            kernel {
+                data = /incbin/("test-kernel.bin");
+                type = "kernel_noload";
+                arch = "sandbox";
+                os = "linux";
+                compression = "none";
+                load = <0x4>;
+                entry = <0x8>;
+                kernel-version = <1>;
+                signature {
+                    algo = "sha1,rsa2048";
+                    key-name-hint = "dev";
+                };
+            };
+            fdt-1 {
+                description = "snow";
+                data = /incbin/("sandbox-kernel.dtb");
+                type = "flat_dt";
+                arch = "sandbox";
+                compression = "none";
+                fdt-version = <1>;
+                signature {
+                    algo = "sha1,rsa2048";
+                    key-name-hint = "dev";
+                };
+            };
+        };
+        configurations {
+            default = "conf-1";
+            conf-1 {
+                kernel = "kernel";
+                fdt = "fdt-1";
+            };
+        };
+    };
diff --git a/doc/usage/fit/source_file_format.rst b/doc/usage/fit/source_file_format.rst
index 7842256..e273773 100644
--- a/doc/usage/fit/source_file_format.rst
+++ b/doc/usage/fit/source_file_format.rst
@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
 U-Boot new uImage source file format (bindings definition)
 ==========================================================
 
@@ -386,7 +388,8 @@
     store is placed immediately after the last byte of the device tree binary,
     aligned to a 4-byte boundary.
 
-data-size : size of the data in bytes
+data-size
+    size of the data in bytes
 
 The 'data-offset' property can be substituted with 'data-position', which
 defines an absolute position or address as the offset. This is helpful when
@@ -405,7 +408,25 @@
 Examples
 --------
 
-Please see `doc/uImage.FIT/*.its` for actual image source files.
+Some example files are available here, showing various scenarios
+
+.. toctree::
+    :maxdepth: 1
+
+    kernel
+    kernel_fdt
+    kernel_fdts_compressed
+    kernel
+    multi
+    multi_spl
+    multi-with-fpga
+    multi-with-loadables
+    sec_firmware_ppa
+    sign-configs
+    sign-images
+    uefi
+    update3
+    update_uboot
 
 .. sectionauthor:: Marian Balakowicz <m8@semihalf.com>
 .. sectionauthor:: External data additions, 25/1/16 Simon Glass <sjg@chromium.org>
diff --git a/doc/usage/fit/uefi.rst b/doc/usage/fit/uefi.rst
new file mode 100644
index 0000000..3bbacb5
--- /dev/null
+++ b/doc/usage/fit/uefi.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+UEFI
+====
+
+Example FIT image description file demonstrating the usage of the
+bootm command to launch UEFI binaries.
+
+Two boot configurations are available to enable booting GRUB2 on QEMU,
+the former uses a FDT blob contained in the FIT image, while the later
+relies on the FDT provided by the board emulator.
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "GRUB2 EFI and QEMU FDT blob";
+        #address-cells = <1>;
+
+        images {
+            efi-grub {
+                description = "GRUB EFI Firmware";
+                data = /incbin/("bootarm.efi");
+                type = "kernel_noload";
+                arch = "arm";
+                os = "efi";
+                compression = "none";
+                load = <0x0>;
+                entry = <0x0>;
+                hash-1 {
+                    algo = "sha256";
+                };
+            };
+
+            fdt-qemu {
+                description = "QEMU DTB";
+                data = /incbin/("qemu-arm.dtb");
+                type = "flat_dt";
+                arch = "arm";
+                compression = "none";
+                hash-1 {
+                    algo = "sha256";
+                };
+            };
+        };
+
+        configurations {
+            default = "config-grub-fdt";
+
+            config-grub-fdt {
+                description = "GRUB EFI Boot w/ FDT";
+                kernel = "efi-grub";
+                fdt = "fdt-qemu";
+                signature-1 {
+                    algo = "sha256,rsa2048";
+                    key-name-hint = "dev";
+                    sign-images = "kernel", "fdt";
+                };
+            };
+
+            config-grub-nofdt {
+                description = "GRUB EFI Boot w/o FDT";
+                kernel = "efi-grub";
+                signature-1 {
+                    algo = "sha256,rsa2048";
+                    key-name-hint = "dev";
+                    sign-images = "kernel";
+                };
+            };
+        };
+    };
diff --git a/doc/usage/fit/update3.rst b/doc/usage/fit/update3.rst
new file mode 100644
index 0000000..4ff3950
--- /dev/null
+++ b/doc/usage/fit/update3.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Automatic software update: multiple files
+=========================================
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Automatic software updates: kernel, ramdisk, FDT";
+        #address-cells = <1>;
+
+        images {
+            update-1 {
+                description = "Linux kernel binary";
+                data = /incbin/("./vmlinux.bin.gz");
+                compression = "none";
+                type = "firmware";
+                load = <FF700000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+            update-2 {
+                description = "Ramdisk image";
+                data = /incbin/("./ramdisk_image.gz");
+                compression = "none";
+                type = "firmware";
+                load = <FF8E0000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+
+            update-3 {
+                description = "FDT blob";
+                data = /incbin/("./blob.fdt");
+                compression = "none";
+                type = "firmware";
+                load = <FFAC0000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+        };
+    };
diff --git a/doc/usage/fit/update_uboot.rst b/doc/usage/fit/update_uboot.rst
new file mode 100644
index 0000000..a9288ee
--- /dev/null
+++ b/doc/usage/fit/update_uboot.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Automatic software update
+=========================
+
+Make sure the flashing addresses ('load' prop) is correct for your board!
+
+::
+
+    /dts-v1/;
+
+    / {
+        description = "Automatic U-Boot update";
+        #address-cells = <1>;
+
+        images {
+            update-1 {
+                description = "U-Boot binary";
+                data = /incbin/("./u-boot.bin");
+                compression = "none";
+                type = "firmware";
+                load = <0xFFFC0000>;
+                hash-1 {
+                    algo = "sha1";
+                };
+            };
+        };
+    };